Glass can cups for sublimation. Clear double walled “snow globe” glass is sublimation ready. Has hole in the bottom to fill with glitter/fluid and then seal with UV resin.
Glass MUST be sublimated prior to filling with glitter/fluid and then sealed with UV resin.
For use in a mug/tumbler press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as metal straws and straw cleaning brushes are also available in a separate listing.
***Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.
Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets.
*Tumbler Press* (Equipment settings and functions may vary. These settings are on our Elite Pro Max tumbler press offered in the shop). Make sure your pressure is very light!!!
Press at 360°F for 120 seconds, then turn the tumbler halfway and press again for another 120 seconds. If the design is darker, an additional few seconds may be required. Remove transfer and let cool.
*Convection Oven* (Equipment settings will vary!)
Apply shrink wrap using a heat gun to shrink it tight to the tumbler.
Bake in a convection oven at approximately 385-400 degrees F for 6.5-8 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!
Remove from oven and immediately remove shrink wrap and transfer. GLASS WILL BE HOT!! No sealant is necessary on sublimation. *Hand washing is recommended as the high heat in many dishwashers may reactivate the ink and cause it to bleed.
As with all glass products, avoid extreme temperature changes, as this may cause cracking or even explosion of the glass.
Bamboo lid can be engraved! Use a laser engraver or wood burning tool to add a design, words, or other details to the bamboo lid for extra personalization options!
| Color | Flashing Rainbow, Warm Light, White Light, Red Light |
|---|
Professionally packed and fast shipping
Thanks to our longstanding association with UPS FedEx DHL and other top global carriers, we can provide a range of shipping options. Our warehouse staff are trained to package your goods precisely according to the specifications we provide. Before shipping your items will be carefully inspected and secured. Everyday we deliver thousands of packages to clients across many countries. This shows that we're committed to being the largest online retailer in the world. There are distribution centers and warehouses across Europe and the USA.
Orders that contain more than 1 item are given processing time according to each item.
Before shipping, all ordered items will be thoroughly examined. The majority of orders are delivered within 48 hrs. The delivery time should be between 3-7 working days.
Returns
The inventory is constantly changing and we cannot control it completely due to the fact that many parties are involved, including our factory and warehouse. Stock levels can fluctuate at any time. It is possible that stock may run out after your order has been placed.
Our policy is valid for 30 days. If you have passed 30 days without a trace since the purchase and we are unable to offer an exchange or refund.
The item cannot be used and in its original condition. The item should be in its original packaging.
Related products
Blanks
20 oz SNACK LID STRAIGHT Sublimation ready skinny tumbler RTS ACC Sublimation Blanks & Designs
